Yes. The inspector will need to verify the hardware securing the door hinges and strike plates to the door framing. For most windows it is only possible to verify the fastener type and location by operating the window and viewing from the inside.
Show All Answers
Yes. A permit is required to verify that the manufacturer's installation procedures are followed and are in compliance with the Florida Building Code. Interior door replacement does not require a permit.
The manufacturer’s installation instructions and the Florida product approval for each item that will be installed.
Not all doors or windows meet the wind rating requirements for this area. Providing the design drawings will allow the plan reviewer to verify that the door/window planned for installation will meet the minimum design requirements. The installation instructions allow the inspector to verify that the door/window was properly installed and will meet the wind rating specified by the manufacturer.